9.8.1 Erection of the clamps

It is essential to ensure that the structure from which the clamp(s) is suspended is undamaged and adequate for the load it is intended to carry. The load includes the weight of the clamp(s) together with any attachments.

Ensure that the clamp is of a suitable type for the particular application.

Ensure that the clamp is of the right size for the beam upon which it is to be used.

Ensure that the clamp is seated correctly in accordance with manufacturer’s instructions and that all fastenings are secure. It should be noted that different designs of clamp are located in different ways and it is imperative that the clamp is correctly adjusted so that it locates in the correct way. In particular, care should be taken to ensure that the suspension point is correctly located relative to the beam. (See Figure 9.8.1-1 )

Ensure that any ancillary attachments (shackles, etc.) are of suitable dimensions and SWL