10.9.1 Marking
In addition to the information required by the applicable legislation and standard being worked to, the following information should be permanently and legibly marked on a suitable part or parts of the slewing jib crane:
Identification mark. (if the manufacturer has not provided a unique serial number then it is the responsibility of the user to add the identification mark to identify the equipment with the inspection report and examination reports)
SWL. This should be marked on both sides of the jib arm in such a way that it is readily legible from the operating level.
Standard number, where applicable.
If supplied without lifting appliance, Maximum hoisting speed for powered hoists or else the words ‘Manual Hoist’
Name of manufacturer or supplier.
Classification designation.
Year of manufacture.
Special care must be taken with regard to the SWL of the jib and lifting appliance. The maximum load to be lifted, including the weight of the lifting equipment, should not exceed the marked SWL of the jib or the appliance. This is particularly important in cases where the lifting appliance is regularly removed and replaced as may be the case where the crane is used for maintenance purposes.