11.2 SCOPE

This section of the code covers runways manufactured from standard constructional sections and/or proprietary track systems. They may be built into or supported by building members, free standing structures or a combination of both. The runway track may be supported at each end, at intervals along its length or have a cantilever. The track section follows a level path without change of height.

The use of runways is always associated with a lifting appliance, usually a hand chain hoist or power operated hoist attached to or combined with a trolley. Specific guidance on the safe use of these items can be found in the following sections:

This section does not cover overhead conveyor systems or specialised motive power systems sometimes referred to as Monorails. Neither does it cover systems with friction drive units which deviate from the horizontal. Runways, either temporary or permanent, used for the suspension of access equipment are also excluded from this code.

Although mentioned in this section, no guidance is given in respect of retractable jibs, runway switches or turntables. Where these form part of a runway installation, the manufacturer’s specific guidance and recommendations should be sought and followed.